Every edit: Zhang Yangyun
On June 3, according to the website of the State Administration for Market Regulation, Tesla, Volkswagen, etc. issued a recall announcement for certain models of specific production dates.
Tesla Motors (Beijing) Co., Ltd. recalls some imported Model 3 electric vehicles
A few days ago, Tesla Motors (Beijing) Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the “Regulations on the Administration of Recalls of Defective Automobile Products” and the “Implementation Measures of the Regulations on the Administration of Recalls of Defective Automobile Products” and decided to recall from now on The following vehicles.
(1) Part of the imported Model 3 electric vehicles produced from January 12, 2019 to November 20, 2019, a total of 311 units.
During the assembly process of some vehicles within the scope of this recall, the screws that fix the D-ring on the B-pillar at the top of the front seat belt may not be tightened to the standard torque.When a vehicle is in a collision, if the screws fall off in extreme cases, the seat belt will not function as expected, which will increase the risk of occupants being injured in the collision accident, and there will be safety hazards。
Tesla Motors (Beijing) Co., Ltd. will conduct a free inspection of the tightening torque of the vehicles within the scope of the recall. If it is found that the tightening torque does not meet the standard, it will fix the D-rings on the top of the seat belt to the two B-pillars. Repair the screws to ensure that they meet the standard tightening torque; if the B-pillar mounting hole threads or D-rings are found to be damaged during the inspection, the mounting hole threads will be repaired or the D-rings will be repaired or replaced. Eliminate safety hazards.
(2) Part of the imported Model 3 electric vehicles produced from February 2, 2019 to November 20, 2019, a total of 423 units.
Some vehicles within the scope of this recall may not tighten the brake caliper bolts to the standard torque, and the bolts may loosen over time.In extreme cases, if the fixing bolt becomes loose enough or comes out of the steering knuckle, so that the caliper contacts the inner surface of the rim, the wheel may not be able to rotate freely, and the tire may lose pressure, which will increase the risk of vehicle collision and pose a safety hazard.。
Tesla Motors (Beijing) Co., Ltd. will conduct a free inspection of the tightening torque of the brake caliper bolts for vehicles within the scope of the recall. If it is found that the tightening torque does not meet the standard tightening torque, it will re-tighten the bolts to the standard torque; if the inspection is underway In the process, it was discovered that the vehicle’s steering knuckle or rim was damaged due to loose or missing bolts. Tesla will provide free repairs to eliminate potential safety hazards.
Volkswagen (China) Sales Co., Ltd. recalls some imported Beetle series cars
A few days ago, Volkswagen (China) Sales Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the “Regulations on the Administration of Recalls of Defective Automobile Products” and the “Implementation Measures of the Regulations on the Administration of Recalls of Defective Automobile Products”. It was decided to recall some imported Beetle series cars of 2012-2014 that were produced between April 24, 2012 and July 3, 2014, starting from October 15, 2021, totaling 30,687 vehicles.
The front airbags of the drivers of vehicles within the scope of the recall are equipped with a desiccant ammonium nitrate gas generator produced by Takata.After the vehicle has been used for a long time, if the driver’s front airbag is triggered to deploy in a collision accident, the gas generator may be abnormally damaged, causing fragments to fly out and injuring the occupants in the vehicle, posing a safety hazard。
Dongfeng Motor Group Co., Ltd. Passenger Vehicle Company recalls some Dongfeng Fengshen A30 cars
A few days ago, Dongfeng Motor Group Co., Ltd. Passenger Vehicle Company filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the “Regulations on the Recall of Defective Automobile Products” and the “Measures for the Implementation of the Regulations on the Recall of Defective Automobile Products.” Starting from October 8, 2021, some Dongfeng Fengshen A30 vehicles produced between May 12, 2014 and November 29, 2015 will be recalled, a total of 21,477 vehicles.
For vehicles within the scope of this recall, due to the poor connection between the torque sensor harness of the electronic power steering column and the transfer line of the vehicle, the torque signal transmission is unstable. In extreme cases, the electronic power steering may fail and the steering may be heavy, posing safety risks.
Tianjin FAW Toyota Motor Co., Ltd., GAC Toyota Motor Co., Ltd., Toyota Motor (China) Investment Co., Ltd. recalled some imported and domestically produced vehicles
Recently, Tianjin FAW Toyota Motor Co., Ltd., GAC Toyota Motor Co., Ltd., and Toyota Motor (China) Investment Co., Ltd. have supervised the national market in accordance with the requirements of the “Regulations on the Recall of Defective Automobile Products” and the “Implementation Measures on the Administration of Recall of Defective Automobile Products The State Administration of Management filed a recall plan.
(1) Tianjin FAW Toyota Motor Co., Ltd.
Starting from July 19, 2021, some Corolla vehicles produced during the period from August 6, 2019 to April 15, 2021, totaling 191,936 vehicles will be recalled;
(2) GAC Toyota Motor Co., Ltd.
Starting from July 10, 2021, some Highlander vehicles produced between October 13, 2018 and April 9, 2021, totaling 25,143 vehicles will be recalled;
(3) Toyota Motor (China) Investment Co., Ltd.
From July 19, 2021, some imported Lexus RX300 vehicles produced between September 14, 2018 and March 13, 2021 will be recalled, a total of 10,905 vehicles.
For some vehicles within the scope of this recall, due to manufacturing deviations in the assembly process of the internal components of the high-pressure fuel pump in the parts production plant, some components were not fully compressed.During use, abnormal wear may occur inside the high-pressure fuel pump. Affected by the loosening of internal components, fatigue cracks may occur in the welding joints of the high-pressure fuel pump, and there is the possibility of fuel leakage. In extreme cases, it will increase the risk of fire. Security risks。
Tianjin FAW Toyota Motor Co., Ltd., GAC Toyota Motor Co., Ltd., and Toyota Motor (China) Investment Co., Ltd. will replace and improve qualified high-pressure fuel pumps free of charge for vehicles equipped with the above-mentioned defective parts in the target vehicles to eliminate potential safety hazards.
Dongfeng Motor Co., Ltd. recalls some Dongfeng Nissan Teana and New Loulan cars, domestically produced Infiniti cars and Venucia cars
A few days ago, Dongfeng Motor Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the “Regulations on the Administration of Recall of Defective Automobile Products” and the “Implementation Measures of the Regulations on the Administration of Recall of Defective Automobile Products”. details as follows:
(1) Starting from June 5, 2021, part of the seventh-generation Dongfeng Nissan Teana and New Loulan vehicles produced from September 8, 2020 to November 5, 2020 will be recalled, a total of 23,641 vehicles.
(2) Starting from June 30, 2021, some domestic Infiniti Q50L and QX50 vehicles produced from August 19, 2020 to November 3, 2020 will be recalled, a total of 4977 units.
Due to insufficient heat treatment, the front wheel steering knuckles and rear axle seat parts of some vehicles within the scope of the recall did not meet the requirements.In extreme cases, the front wheel steering knuckle and the rear axle seat of the rear wheel may be deformed due to the impact of external force, and crack after long-term use, causing the vehicle to be unable to drive or the wheels to fall off, posing safety hazards。
Emergency measures: Before the vehicle is recalled for repair, users should drive carefully to avoid collisions with curbs and other protrusions.
(3) Starting from June 3, 2021, some of the 2020 Venucia and 2021 Venucia T90 vehicles produced from September 22, 2020 to December 11, 2020 will be recalled for a total of 4,405 vehicles.
Due to the supplier’s production of the vehicles within the scope of this recall, the welding strength of the flange of the engine’s high-pressure fuel pump is insufficient.After fatigue and durability, the flange may break, causing the high-pressure fuel pump to not work and causing insufficient fuel pressure, causing the engine to stall when the vehicle is running, which poses a safety hazard。
Daily economic newsReturn to Sohu to see more
Editor:
Disclaimer: The opinions of this article only represent the author himself. Sohu is an information publishing platform. Sohu only provides information storage space services.
.